Reusable Grade Tags for Climbing Gyms: Why Switch From Tape

Most climbing gyms mark grades with tape. It’s cheap and it works, but every reset leaves a pile of peeled tape in the bin, and by the end of a season some of the writing is smudged or hard to read. Reusable grade tags are one way to fix that.
We’re climbers who 3D print grade tags in Canada, so we’re not neutral. This guide covers what changes when a gym switches, the ways gyms use colour, how start hold markers work and what you can customize, with photos from gyms already using our tags.
- Why gyms switch from tape
- Environmental impact
- Grade tag types
- Colour options
- Ways to use colour
- Start hold markers
- Custom tags and sizes
- Why PETG
- Gyms using our tags
- How ordering works
Why Gyms Switch From Tape to Reusable Tags
Tape is a fine place to start. The downsides show up over time, and these are the four things a reusable tag changes.
- Less tape waste. Tape is peeled off and thrown out at every reset. A tag is unscrewed and put on the next climb, so one tag can mark a new climb every reset for as long as it lasts.
- Cleaner and easier to read. Every tag has the same size, shape and lettering, so grades are easy to find from across the room. Hand-cut tape with handwritten grades looks different from marker to marker.
- Sharp contrast that won’t fade. The text is raised off the face of the tag and printed in two colours, black on white by default. There is nothing to rub off, so a V4 still reads as a V4 at the end of the season.
- Customized to your gym. Match your logo, font, colours and style, and choose the size that suits your walls. More on that in custom tags.
| Tape | Reusable grade tags | |
|---|---|---|
| Waste at each reset | Peeled off and thrown out | Unscrewed and used again |
| Readability | Depends on how it was cut and written | Printed text, raised for contrast |
| Wear | Can smudge, curl or lift off the wall | Won’t curl, fade, peel or crack |
| Look | Whatever tape colours you can buy | Your colours, logo, font and size |
| Cost | Low per marker, bought again every reset | Higher up front, then reused |
Tags cost more up front than a roll of tape, and the saving comes from using them again. They suit gyms that reset often and want a consistent look.



Environmental Impact: Tape Waste vs Reusable Tags
Every strip of tape on a boulder ends up in the bin at the next reset. Take a gym that sets 60 new boulders a month and marks each one with five 6-inch strips of duct tape for the grade and start holds. In a year that adds up to:
Over three years that is more than a mile of tape and over 50 lb of waste, from marking climbs alone. Duct tape is a mix of plastic film, cloth and rubber adhesive, so most recycling programs won’t take it and it goes to landfill.
- Reused, not thrown out. A tag is unscrewed at the reset and goes straight onto the next climb, so the same set marks every reset instead of a new roll of tape.
- Made to last. PETG won’t curl, peel or crack, so tags stay on the wall for reset after reset. More in why PETG.
- No sticky residue. No tape means no adhesive left on holds and walls to scrub off.
- Printed to order in Canada. We only make the tags you order, and they ship from within Canada.
Example: 60 boulders reset monthly, five 6-inch strips of duct tape per boulder. That is about 600 yards of tape a year, or 60 rolls of 10 yards at about 130 g each.
Grade Tag Types
Every tag is 3D printed to order in the full grade range. Pick the types your gym needs. Each one links to its own page, where you can see every grade and the full specs.
Boulder Grade Tags
65mm diameter · $3.50 / tag
V-scale tags from V0 to V10, or a custom grading scale.
Route Grade Tags
70mm diameter · $3.75 / tag
Grades 5.5 to 5.9 are one tag each. 5.10 and up come in +/- or A/B/C/D format, so tell us which your gym uses.
Base + Insert Tags
$2.30 / base + $2.85 / insert
Two parts: a coloured base and a grade insert. Pair any insert with any base colour to match every grade and hold colour in your gym.
Start Hold Tags
from $1.00 / tag
Shape-coded markers for the starting holds of a climb. See start hold markers below.
Comp Tags
90mm diameter · $4.95 / tag
Numbered tags by category, with custom numbering, category labels and your gym logo available.
Want to see them off the computer? Browse real photos in the image gallery, or see which gyms already use them.
Colour Options
Pick any two of the 16 standard colours for a tag, black on white by default, at no extra charge. Pink, Purple and Teal are translucent. A third colour adds $0.25 per tag. We also have 16 additional colours, including six translucent colours. Hover over a swatch for its name, or see the full list in the colours tab. Swatches are renders, and printed colours can look a little different on your screen.
| 16 standard coloursNo extra charge | |
|---|---|
| 16 additional coloursExtra charge |
Additional colours aren’t stocked as standard and cost extra, so contact us for pricing.
Ways to Use Colour on Your Grade Tags
There isn’t one right way to use colour. These are the main approaches, and you can use whichever suits how your gym sets.
Match the rim to the hold
The ring around the tag takes the colour of the hold it sits next to, so climbers find the right tag by looking at the hold they are about to grab. There are two ways to do it:
- Base + insert tags. A coloured base holds a grade insert. Pair any insert with any of the 16 colours, so one set of inserts covers every grade and hold colour combination in your gym.
- A standard boulder or route tag with a different ring colour. Ask for the ring colour you want. Tags are two colours as standard, and a third colour adds $0.25 per tag.


Use black for every tag
The simplest system is one colour, where the grade does the work. The wall stays visually quiet, there is nothing to match to holds, and nothing to restock by colour.


Map colours to grade ranges
Give each grade, or each band of grades, its own ring colour. Climbers can spot the climbs in their range from across the gym, and setters can see at a glance how a section is spread across grades. You choose the ranges and the colours.


Whichever you choose, send us your list of grades and colours with your quote request. We send a design preview for your approval before anything is printed.
Start Hold Markers
Almost every boulder problem needs its start holds marked, and they get re-marked at every reset. Start hold tags give you a reusable marker for that job, which cuts down on tape waste.
Clear and easy to find
A start marker only works if climbers see it straight away. The tags are solid colour in a shape that is easy to tell apart from a round grade tag. There are four to choose from:
- Triangle, 45 mm, for a compact marker.
- Teardrop, 75 x 30 mm, a longer marker.
- Triangle rim and teardrop rim, which add a second colour around the edge.
Match the tag colour or the hold colour
- Match the hold. The marker takes the colour of the hold it sits on, so climbers who follow holds by colour know where to start.
- Match the grade tag. The marker takes the colour of the climb’s grade tag, so the start and the grade read as a pair.




See sizes and prices on the start hold tags page. To mark newly set climbs as well, there are new climb tags in a circle or triangle.
Custom Grade Tags and Sizes
Standard tags suit most gyms. If you want tags that look like they belong to your gym, we can customize. See the custom tags page for more examples:
- Colours. Any two of the 16 standard colours at no extra charge, a third for $0.25 per tag, or one of the additional colours above.
- Gym logo. On the face of the tag, or as the tag outline.
- Font and text. Match your gym’s font, or swap the grade for your own wording or a fully custom grading system.
- Shape. A custom outline or mounting-hole layout, including a tag shape that matches your logo.
- Size. Scale the tag up or down from the standard size.







Custom sizes
Standard tags are 65 mm for boulder, 70 mm for route and 90 mm for comp. We can scale the diameter up or down. Bigger tags are easier to read from further away, and smaller tags fit tight holds and small features. Tell us the size you want when you request a quote.
Extra fees apply to customization, and the quote shows them before you commit.
Have a custom idea?
Send us your logo, font, colours or size and we’ll quote it.
Why PETG: Durable Tags Made to Be Used Over and Over
Every grade tag we make is 3D printed in PETG, a tough plastic chosen for gym walls. They’re built to be unscrewed, moved and used again.
- Impact resistant. It flexes under stress instead of cracking or shattering.
- UV stable. It holds up in sunlight without breaking down.
- Unaffected by chalk and moisture. No absorption, swelling or breakdown over time.
- Safe wear surface. It stays smooth as it wears, with no risk of splintering.
Common alternatives like PLA and carbon-fibre-reinforced PLA are more brittle, wear out faster and can splinter as they wear. We chose PETG for durability that holds up in the gym.
Built for the wall
- Won’t curl, fade, peel or crack. They hold up to being kicked or stood on.
- Two colours with raised text. The text is sized to stay legible from across the gym.
- 3.6 to 4.4 mm thick on most tags, depending on the type.
- Countersunk holes for a #8 screw. The screw pulls the tag flush to the wall. Screws are not included.
Gyms Already Using Our Tags
We’re a small Canadian company, and this is where we are so far. Gyms listed are using our grade tags or have placed an order.
“We had some custom grade tags made for Momentum Movement Academy and have had nothing but compliments on them and from a setting (I'm the head setter at the gym) standpoint they are the sturdiest tags I've worked with!”
How Ordering Works
- Request a quote. Email us the tags, grades, colours and quantities you need.
- Approve the design. We send a quote and a design preview for your sign-off.
- Confirm and invoice. Once you confirm, we send your invoice.
- Production. Everything is printed to order, typically 1 to 4 weeks depending on order size.
- Shipping. Tracked shipping anywhere in Canada, typically 3 to 5 business days.
There is no minimum order. Shipping is quoted by location, and grade tag orders over $499 ship free. Not sure yet? Ask about a free sample box so you can see and feel the tags in person.
Ready to switch?
Tell us which tags, grades and colours you’re after and we’ll send a quote and a design preview.
Frequently Asked Questions
Are reusable grade tags better than tape?
For gyms that reset often, usually. Tags are unscrewed and used again instead of thrown out, they stay legible, and they can be customized to match your gym. They cost more up front than tape, so the saving comes from reusing them.
How much tape does a climbing gym throw away?
In our example, a gym setting 60 new boulders a month peels off about 3,600 strips of tape a year: roughly 600 yards and 17 lb of waste. Most recycling programs won’t take duct tape, so it goes to landfill. Reusable grade tags are unscrewed and used again at every reset.
What are your grade tags made of?
PETG, 3D printed in Canada. It is impact resistant, UV stable and unaffected by chalk and moisture, and it stays smooth as it wears instead of splintering.
How do grade tags mount to the wall?
Each tag has countersunk holes for a #8 screw, which pulls the tag flush to the wall. Screws are not included.
Can we match our gym’s logo, font and colours?
Yes. We can add your logo, use your font, change the grade text to your own wording or grading system, and match your colours. Extra fees apply to customization, and we quote it before you commit.
What colours are available?
Any two of 16 standard colours at no extra charge, black on white by default, and a third colour for $0.25 per tag. We also have 16 additional colours at an extra charge, including matte and translucent colours.
Can you make tags in a custom size?
Yes. We can scale the tag diameter up or down from the standard size. Standard sizes are 65 mm for boulder tags, 70 mm for route tags and 90 mm for comp tags.
What is a start hold tag?
A reusable marker for the starting hold of a climb. It comes as a triangle or a teardrop, each with a rim version that adds a second colour. Gyms match the colour to the hold or to the climb’s grade tag.
How do you use colour on grade tags?
Gyms match the rim colour to the hold, use black on every tag, or give each grade or range of grades its own colour. You can do the first with base + insert tags or with a different ring colour on a standard tag.
Is there a minimum order?
No. Pricing is one flat price per tag and everything is printed to order.
How long does an order take, and do you ship across Canada?
Production usually takes 1 to 4 weeks depending on order size, then shipping takes 3 to 5 business days. We ship within Canada only. Shipping is quoted by location, and grade tag orders over $499 ship free.
Can we try the tags before ordering?
Ask about a free sample box so you can see and feel the tags in person.
Want to see more first? Browse the grade tags, look through the image gallery or send us a message and we’ll help you work out the right set for your gym.
















































